Can I 3D-print a NORI A3?

No. Public files are cosmetics only. The robot is sold assembled; megabot will not pretend the arms or column are printable kits.

Why is NORI on a 24 V rail?

That is the published pack. Mixing 12 V XLe parts or 7.4 V Open Duck servos onto NORI would be electrically dishonest, so the workshop blocks it.

Featured look · 2026 · 110 cm · 24V

NORI A3: assembled bimanual manipulator

NORI A3 is a published assembled product — a 45×45 cm differential-drive base, three-stage lift, dual arms, face, and RPLIDAR C1 on a 24 V 18 Ah pack. megabot treats it as a closed shop robot with cosmetics-only printables, not a DIY clone you can BOM from hobby servos.

Open in workshop Official project Nori A3

NORI A3 robots in the San Francisco workshop — Nori Robotics

What megabot shows

Form: wheeled differential-drive base (~110 cm) with 1.5 kg / 55 cm reach arms.
Voltage rail: 24 V only.
Print story: cosmetics-only files on nori-printables /a3 — not a structural reprint.
Published robot: USD 1688 → AUD 2349 converted.
Buy path: Nori preorder page; docs live on docs.norirobotics.com.

USD 1688 published robot — cosmetics only printable 6×STS3095, 4×STS3250, 6×STS3215, Pi 5 4GB, 24 V 18 Ah, RPLIDAR C1.

NORI A3 arm holding a dumbbell — Nori Robotics

Questions

Can I 3D-print a NORI A3?: No. Public files are cosmetics only. The robot is sold assembled; megabot will not pretend the arms or column are printable kits.
Why is NORI on a 24 V rail?: That is the published pack. Mixing 12 V XLe parts or 7.4 V Open Duck servos onto NORI would be electrically dishonest, so the workshop blocks it.